Click image to view full size image
SPECIFICATIONS
| Item | Unit | QJ-8011K |
| Ozone output | G/Hr | 60 |
| Power | W | 680 |
| Voltage | V/Hz | AC 220/110,50/60 |
| Concentration | Mg/L | 15-25 |
| Gas feeding | / | air source |
| Dimension(L X W X H) | cm | 55X40x113 |
| Unit weight | Kg | 38 |
| External case | / | Stainless steel |
| Cooling method | / | water cooling + ambient air cooling |
| Cooling water flow rate | M3/Hr | 0.1-0.2 |
| Attachments | Sets | silicone tube, fuse, etc |
1. Technology corona discharge high-quality quartz ozone cell
2. Adjustable ozone output 0-100%
3. Inner temperature controller to prevent heat generating
4. Ozone generated tube cooling way: water-cooling system
5. Special design to avoid water return
6. 120 mins timer controller or continuous running
7. Inner air compressor
8. Inner refrigerant dryer
9. Inner ultra-filter (2sets), Inner electric drain valve(2sets)
10. CE approved
11. Stainless steel 304 case
1. Before use this machine, put it in a stable flat place which can hold its weight.
2. Use the power equipped with the machine;
3. The machine use for air purification,fisrtly ,attach the silicone tube into the ozone outlet and then turn on the power;
4. Set the timer and then come out ozone, and put the tube into the room.
5. When use for room air purification, it requires nobody is present, after 30 minutes people can walk into the room.
6. If use for water treatment, the air stone should be attached into the silicone tube and put into the water.
7. Attention, the machine should be placed higher than the water,in case that the water refluex occur.
Tips:
1. If use it for air purify, please close door and windows, you just set working time and you can walk away after you coming back will get fresh air.
2. If use it for water purify, please put ozone mchine higher than water for preventing water into machine or you can use with check valve.
Ozone for air purification:
industrial ozone generator for water treatment
